A critical software update is required for your Mac, but an error was encountered while installing this update. Your Mac can’t be used until this update is installed. “Shut Down” or “Try Again” buttons or options What, your Mac can’t be used?! Pretty crazy. Apple Powerbook Pro 2016 model! MacBook Pro (15-inch, 2016) 2.9 GHz Intel core i7. 2TB, Memory is 16 GB 2133 MHz LPDDR3.
Apple Support care had never heard of this problem! Both several people on the telephone support and at the Genius Bar in Den Haag. (The Apple Store, which was quite busy but did not have to wait long!) This was likely a mother board or hardware problem. That much was clear. They had me make a TimeMachine backup, which works great by the way. Re-format the entire drive, erase everything and start fresh. The new install did not help either.
Same problem and was only getting worse; taking longer to start-up each time. Every time I would start up or restart I would get told, “A critical software update is required for your Mac. Connect to the Internet now.” Or something to that effect. If I could not connect to the Internet it was a problem!
When on vacation in Greece, I must have wasted 2 hours of my time trying to fix this! Anyway, Apple fixed the problem. At their cost, of course. Was wishing the Warranty. It was the main board; Logic Board, i7, 2.9GHz, 16GB, 2TB, RadeonPro 460, ETSI Thank God. That is solved.
Hopefully you don’t have this issue. If you do, leave a comment, for it seemed like a rare, odd issue even for Apple! A critical software update is required for your Mac, a solution!
Questions I get asked fairly frequently are variations on the general theme of upgrading the operating systems of older Macs to more recent system versions. There is no all-purpose boilerplate answer. The appropriate system to use depends on variables like the speed of your machine, how much RAM you have, what you use the computer for, and how much performance (speed again) you're willing to trade off in order to have the latest bells and whistles. There is also the matter of support. For example, PowerBooks prior to the, which was introduced in May 1998, are not supported by OS X, which means that (3500/Kanga) has the dubious distinction of being the only G3 model Apple ever made that isn't supported by OS X.
If you're really determined, you can probably get OS X to install on a Kanga using Ryan Rempel's installer hack for some unsupported Macs, but is it worth the trouble on a Mac limited to 160 MB of RAM? I'm doubtful. On the Classic Mac OS side, there is Mac OS 9.2.2, which only officially supports the same machines that OS X does. It seems that a lot of people with older Macs are interested in installing OS 9.2.2, and again, there is an installer hack available that help them to do so.
But is it a wise idea? Not always, in my estimation. The newest officially supported system is often not the ideal one to use. The newest officially supported system is often not the ideal one to use.
For instance, OS 9.1 is supported by the, and, but you won't be very happy with the performance on these 100 MHz and 117 MHz PowerPC 603e computers - or for that matter on the 117 MHz. In this column I will outline what Mac OS versions are supported by which PowerBook and iBook models back as far as the 680x0-based and and offer my suggestions as to which I think is the ideal OS for each model. I'm sure there will be those who disagree with my picks in some cases, but here are my OS picks model by model. Intel 'Books All Intel MacBook, MacBook Air, and MacBook Pro models This one is a no-brainer.
Run the latest version of OS X 10.5 'Leopard' (currently version 10.5.4) and be happy. G4 'Books Aluminum PowerBook G4 and G4 iBook (1.33 GHz to 1.67 GHz) Not as much a no-brainer, especially at the lower end of the clock speed range.
Leopard is supported decently. The machine I'm typing this on right now is a, and it supports Leopard reasonably well, albeit with less than scintillating performance.
Free Antivirus For Mac Review. The Best free Mac Antivirus Software 2018. Compare the Mac Antivirus Side-By-Side. Just looking - Answered by a verified Mac Support Specialist We use cookies to give you the best possible experience on our website. By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.
OS X 10.4.11 'Tiger' will be more lively and more gracefully supported on these last and fastest G4 'Books, but I find some of the features in Leopard - notably Spaces, Time Machine, and QuickLook - just too cool to live without if I don't have to. My suggestion here is that if you have 1.25 GB of RAM or better, Leopard is well worth seriously considering. With less memory than that, I would find it too compromised.
I have 1.5 GB and wish I had 2 GB in my PowerBook. Aluminum PowerBook G4 and G4 iBook (867 MHz to 1.25 GHz) These machines are officially supported by OS X 10.5, but it would not be my ideal choice; I would go with OS X 10.4.11.
If you do decide to run Leopard, load up with as much RAM as you can afford. 800 MHz iBook G4 The is the newest 'Book that doesn't make the Leopard cut, although you can to make it work. Use OS X 10.4.11.
Titanium PowerBook G4 (667 MHz to 1 GHz) These are the newest PowerBooks that will dual-boot OS X and OS 9.2.2. I recommend OS X 10.4.11 with at least 512 MB of RAM. Titanium PowerBook G4 (400 to 550 MHz) The first two generations of the titanium PowerBook inherited the Pismo's 8 MB of video RAM, so they won't support Quartz Extreme. That limitation noted, go with OS X 10.3.9 'Panther' on the machine and 10.4.11 on the 500 MHz and models. G3 'Books Dual USB iBook G3 (500 to 900 MHz) Max out the RAM at 640 MB and run OS X 10.4.11, or use OS 9.2.2 and you can get along with less memory.
Pismo PowerBook G3 (400 and 500 MHz G3 or 500 to 500 MHz G4 upgraded) I'm running Mac OS X 10.4.11 on my 550 MHz G4 (with 640 and 384 MB RAM). These computers are in regular use for production work, and I am quite pleased with Tiger's performance. Note however that OS X Quartz Extreme graphics acceleration is not supported by the Pismo's Rage Mobility 128 graphics card with its paltry 8 MB of video RAM. I was also pleasantly surprised by how lively Tiger was on the most recently acquired Pismo with the 500 MHz G3 processor it came with (before I installed the 550 MHz G4 upgrade). Performance would be better with a gig of RAM, but I'm satisfied enough with what I've got that I haven't moved on that.
For a 400 MHz G3 Pismo I would suggest OS 10.3.9 Panther. And of course The Classic Mac OS 9s just fly on any Pismo model. FireWire Clamshell iBook (366 and 466 MHz) I would go with Mac OS X 10.3.9 with (even though it is supported by Tiger) and OS X 10.4.11 with the - or OS 9.2.2 with either. Early Clamshell iBook (300 and 366 MHz) These iBooks will support up to OS X 10.3.9, which would be my OS X version of choice, but especially will be a lot happier camper in Mac OS 9.2.2. Lombard PowerBook G3 (400 and 500 MHz) I consider the the threshold machine for reasonable OS X performance unless you have one of the rare Daystar G4 433 MHz upgrades, in which case I would recommend OS X 10.3.9. You can run up to OS X 10.3.9 on a 333 MHz Lombard, but you'll find it pretty sluggish. A 400 MHz unit - or a 500 MHz G3 or a G4 upgraded Lombard - will give you decent OS X performance in Panther, but the 8 MB of video RAM and mediocre graphics card in these machines hobbles Finder responsiveness.
Mac OS 9.1 or 9.2.2 will give you lots of speed on a Lombard. WallStreet PowerBook G3 Series (233 to 300 MHz) was available in 233 (no cache), 233 (512 KB cache), 250, 266, 292, and 300 MHz versions, and it could also be upgraded to 500 MHz G3 or G4 power. It is the oldest PowerBook officially supported by OS X (up to OS X 10.2.8 'Jaguar') and will run all Classic Mac OS versions from 8.1 through 9.2.2.
My favorite system for my 233 MHz (512 KB cache) WallStreet was OS 9.2.2. As for OS X, my personal recommendation would be to stick with the OS 9s unless you have a 500 MHz G3 or a G4 processor upgrade installed on the WallStreet.
The 292 MHz and 300 MHz units will give you marginally tolerable performance in OS X if you're very patient Some folks profess to be happy with running X on 233 MHz-266 MHz WallStreets, but I wouldn't be. You will also want to max out your RAM at 512 MB for running X on these machines. PowerBook G3 3500/Kanga The is the only G3 Macintosh not officially supported by OS X. OS 9.1 would be my system of choice for this model, or perhaps 9.2.2 with a hack install. XPostFacto should get OS X installed, but I personally would not be interested in running OS X anything slower than a 333 MHz Lombard with at least 512 MB of RAM. PowerPC 603e 'Books PowerBook 2400c The little, IBM Japan-designed and built subnotebook had pretty much the same motherboard architecture as the PowerBook 3400, but it had its processor mounted on a removable daughter card and was thus processor upgradeable.
G3 upgrades were available for these machines. Go with Mac OS 8.6, OS 9.1, or OS 9.2.2. PowerBook 3400c The originally shipped with Mac OS 7.6, but these machines will comfortably support OS 8.6 and up to 9.1, any of which will work well provided you have enough RAM installed. You can apparently install OS X on a 3400 using XPostFacto, but I would advise against it. The old 603e just doesn't have the muscle to run OS X decently. However, OS 9.2.2 should run fine via installer hack if you need it for application support. Note that if you are installing Mac OS 9.1 on a PowerBook 3400 running Mac OS 9.04, you must perform the installation without updating your hard disk drivers or your computer may stop responding during installation.
To prevent the Installer from updating your hard disk drivers, click Options in the Install Software panel of the Mac OS 9.1 Installer and deselect the option to update your hard disk drivers. PowerBook 1400 The was sold in 117, 133, and 166 MHz models and is also processor upgradeable to as fast as a 466 MHz G3, so one can't generalize about the ideal OS version for this machine, which originally came equipped with System 7.5.5 or 7.6. For the 117 MHz model, go with OS 8.1 or OS 8.6 (I have both installed on my 117 MHz 1400 with 40 MB of RAM, but I use OS 8.6 most of the time, and I think it's the most optimum compromise, although System 8.1 is faster). The 133 MHz and 166 MHz models work well with OS 8.6, and if you have your RAM maxed out, you may find that OS 9.0 or 9.1 will work reasonably well, although I think OS 8.6 is still the best choice, since the OS 9s want 40 MB of RAM just to support the system, and the 1400 is limited to 64 MB total RAM.
If you have a G3 processor upgrade installed in your 1400, you certainly have the processor speed to support OS 9.1, a but the RAM limitation still applies. If you only run a few applications at a time, OS 9.1 will be satisfactory. If you need more RAM for running applications, stick with OS 8.6 or even OS 8.1. Incidentally, Password Security is not supported on PowerBook 1400s with Mac OS 9.1. If you have Password Security installed on a PowerBook 1400, you should turn off password protection before installing Mac OS 9.1. PowerBook 5300 The much maligned came with System 7.5.2, which was the worst build of System 7.5. You should definitely upgrade to System 7.5.3 or 7.5.5 at minimum, and those systems will get you the best speed performance out of a 5300, but this computer will support up to OS 9.1.
I would suggest going no higher than OS 8.6 with a 5300, and OS 8.1 will give you the best compromise between speed and features on this model. System 7.5.5 was largely a bunch of PowerBook 5300 reliability patches added to System 7.5.3 and is recommended as the ideal System 7.5 version for these 'Books.
I tried OS 8.5 on our 5300 and was not happy with the performance (note, however, that we only had 24 MB of RAM in that 5300). If you have more RAM in your 5300, you might want to try up to OS 8.6, but I've found that System 7.5.5 or OS 8.1 seem to be the most successful Mac OS X versions for the 5300. PowerBook Duo 2300 What I noted above for the PowerBook 5300 pretty much applies to the as well. Introduced along with the PowerBook 5300 and 190, the 2300 was the last of the Duos and inherited much of the internal architecture of the original 68030 Duo models, which hobbled its performance as a PowerPC machine, making it even slower than the 5300, so System 7.5.5 is probably the ideal choice. 68040 'Books PowerBook 190 The 68040-based was more or less a PowerBook 500 in a PowerBook 5300 case in terms of performance.
For the best speed performance, go with System 7.5.3 or System 7.5.5 on these machines, but OS 8.1 will give you support for HFS+ disk formatting and is a decent performer as well. PowerBook 500 series The, introduced in May 1995, were the first PowerBooks that in my estimation could serve as one's 'only' computer without imposing substantial compromises. With their 25 MHz and 33 MHz 68LC040 processors, full-size keyboards, comprehensive array of ports, built-in ethernet, optional built-in modem, and stereo speakers, the 500 offered unprecedented power, versatility, and connectivity in a PowerBook form factor. They originally came with System 7.5 installed and will support up to OS 8.1.
I would recommend the same systems as for the 190 series for the 500s. Deals on Mac OS X and the Classic Mac OS. Best online prices for System 6, 7.1, 7.5.x, Mac OS 7.6, 8.0, 8.1, 8.5, 9.0, 9.2.2, and other versions.
Best online prices for Mac OS X 10.0, 10.1, 10.2, and 10.3. Best online prices for Mac OS X 10.4. Best online prices for Mac OS X 10.5. Join us on, follow us on or, or subscribe to our Charles Moore has been a freelance journalist since 1987 and began writing for Mac websites in May 1998. His column was a regular feature on MacOpinion, he is news editor at and a columnist at. If you find his articles helpful, Links for the Day. Mac of the Day:, introduced 1993.10.25.
This limited edition black Mac includes a TV tuner, but it was a real Road Apple. Recent Content.